current location: HOME Market outlook
Background - plug-in - advertisement management - content page header advertisement (mobile phone)

These problems are the key to the normal and stable operation of the automatic stacker

Column: Market outlook Author: Time:2022-10-12

The capability of fully automatic palletizing can be easily demonstrated. Just put the weighed raw materials on the tray orderly according to the required sorting method. It only needs to be stacked neatly, not packed, not stacked upside down, indicating that the stacker meets the requirements. Naturally, in order to achieve this, the stacker must meet the preconditions of its own work, namely, switching power supply and pneumatic valve.

After connecting the main power supply of the stacker, it is necessary to connect the compressed air to the air source of the machine, and discharge the condensed water in the air filter screen immediately to detect and remove the dirt in the filter device; Check and adjust the air pressure of the barometer indicator, the oil leakage of the pneumatic triplet of the barometer and the capacity of the oil cup.

 

 

If everything is normal, you can go to the stacker In this process, it will go through three links: shaping, plate supply and package grabbing software. Any problem in any process indicates that there is a common fault in the stacker, which requires standardized and orderly analysis and treatment.

In addition to some basic components, many intelligent sensors are cross assembled in the automatic stacker. Together with the other, they also play an important role in achieving the goal of palletizing system software. As long as any sensor works abnormally, it may lead to abnormal operation of the automatic stacking system software.

In addition, the mechanical equipment is the key to the normal operation of the automatic stacker. In other words, without the normal operation of mechanical equipment, the automatic stacker may have many problems, such as the confusion of packet capturing software, the unavailability of disks, and the inability to move after completion. Electrical equipment is the key point. Without electricity and compressed air, the stacker cannot operate normally.

It is not difficult to see that the focus of the daily maintenance of the automatic stacker is the mechanical equipment and its power and compressed air, which is related to whether the mechanical equipment can work orderly, reliably and stably.

Copyright Notice:The copyright of this article belongs to the original author. If the source is wrong or your legitimate rights and interests are infringed, you can contact us via email, and we will deal with it in a timely manner.
read:3616times

Related articles

Reasons why enterprises choose palletizing robots to replace traditional production lines

The continuous increase of labor costs has formed a development trend, and it is difficult for manufacturing enterprises to recruit people. In the face of difficulties, many enterprises are moving towards automation technology production lines. Among them, the automatic technology complete equipment production line of palletizing robot is more popular and has developed rapidly in recent years.
Market outlook2022-09-19
Reasons why enterprises choose palletizing robots to replace traditional production lines

Digital transformation has become the inevitable trend of the development of the industrial Internet

Mass production of products in all industries is inseparable from palletizing In the past, we relied on manual palletizing. More than ten people completed the handling and stacking work together. High labor intensity, low stacking quality and high turnover rate are not conducive to health. With the rapid development of modern science and technology, labor shortage and rising labor costs, robot handling and palletizing production has been widely used, promoting the development of the industry.
Market outlook2022-09-21
Digital transformation has become the inevitable trend of the development of the industrial Internet

Characteristics and Research Scenarios of Stacking Robot

The cooperative palletizing robot is mainly composed of manipulator, wrist, wrist adjustment mechanism, arm mechanism, rotator, servo drive system, base and other components, with four degrees of freedom of body rotation, horizontal and vertical movement of arm mechanism, and wrist rotation. What are the main components and application research scenarios of the system with the cooperative palletizing robot?
Market outlook2022-09-20
Characteristics and Research Scenarios of Stacking Robot

What are the benefits of using the fully automatic stacker

With the emergence of automatic stackers, stackers are more and more widely used in our lives. Do you know the advantages of using automatic stackers?
Market outlook2022-09-29
What are the benefits of using the fully automatic stacker

What should be paid attention to when selecting the sealing machine?

With the continuous improvement of the degree of automation, more and more enterprises are gradually transforming and upgrading from the original manual to production automation. The introduction of automation equipment has improved the production capacity and personal image of the enterprise, thus improving the production efficiency of the enterprise.
Market outlook2022-09-18
What should be paid attention to when selecting the sealing machine?

This technology is fully automatic palletizer, which is a good helper for enterprise production

Many people have only a general understanding of stackers. They believe that the stacker is a simple mechanical equipment used for handling and stacking goods. In fact, the stacker is not just a simple mechanical equipment. Many production workshops have palletizing robots to load, unload and stack goods. The use of palletizing robots is several times more efficient than traditional labor, but it can also reduce the human cost of enterprises.
Market outlook2022-09-23
This technology is fully automatic palletizer, which is a good helper for enterprise production

Category column