In actual operation, what problems should be paid attention to when dealing with the failure of auto
With the highly efficient development of China's economy, the development of fully automatic, palletizing machines and automobile production lines in China is very short, but it is in the period of transformation from traditional weapons and equipment to first made weapons and equipment. Now, with the development of a large number of domestic full-automatic stacker production lines, full-automatic stacker will automatically have a broader industry prospect and development potential! This paper explains some shortcomings of the transposition of the internal structure equipment of the automatic stacker in the construction process. Here, the network editor will introduce how to solve this problem in detail.
1. The indexing conveyor works normally after the automatic stacker runs. When the packaging bag needs indexing, the indexing conveyor will not interrupt its work, and the indexing machine will not clamp the packaging bag for indexing. If this disadvantage persists, the indexing photoelectric sensor has a disadvantage. If yes, it may be the wrong count.
2. If the stepper has been working for a period of time, it can be adjusted by rotating the power switch. If the servo motor is indexed, the rotation angle can be adjusted by the controller. If the cylinder is displaced, the viewing angle can be adjusted by adjusting the cylinder speed and positioning direction.
3. If the indexing machine is indexed and the straight sending splint is opened, the indexing machine will not turn over and the indexing conveyor will not start. The disadvantage is that the detection switch of the straight hair splint is turned on in place and is not turned on/off.
4. If the indexing conveyor is interrupted, the indexing machine will not clamp the bag. This disadvantage may occur on the relay or cylinder of the automatic paper stacker with bag clamping.
5. If the indexer does not step after clamping the bag, mainly check whether the clamping detection switch is on or off. It may be open or closed. The fault may occur in the motor and control circuit.
